- 3 -
Tiller CS
CONTENTS
1. INTRODUCTION 5
1.1 SOME NOTES REGARDING THE USER MANUAL 5
1.2 DECLARATION OF CONFORMITY 6
1.3 DELIVERY LETTER 7
1.4 TILLER IDENTIFICATION AND MANUAL CODE 7
1.5 GENERAL DELIVERY NOTES 8
1.6 TILLER COMPOSITION 9
2. SAFETY 10
2.1 LIST OF RESIDUAL RISKS 10
2.2 SAFETY PRESCRIPTIONS 10
2.3 DEFINITIONS 10
2.4 CONVENTIONAL SYMBOLS 11
2.5 OPERATOR REQUIREMENTS 11
2.6 CLOTHING AND PPE 12
2.7 SAFE USE OF THE MACHINE 12
2.8 INTENDED USE 12
2.9 SAFETY DEVICES 13
2.10 POSITION AND MEANING OF THE PICTOGRAMS 13
3. UNLOADING AND UNPACKING THE TILLER 16
3.1 TILLER PROTECTED BY HEAT-SHRINKABLE FILM 16
3.2 TILLER PACKAGED IN WOODEN BOX 17
4. TECHNICAL SPECIFICATIONS 18
5. START-UP 19
5.1 CONNECTING THE TILLER TO THE TRACTOR 19
5.2 PTO DRIVE SHAFT COUPLING 20
5.3 CHECK THE STABILITY OF THE TRACTOR-TILLER COMPLEX. 21
5.4 ROAD TRANSPORT 21
6. ADJUSTMENTS 22
6.1 CLUTCH ADJUSTMENT 22
6.2 WORK HEIGHT ADJUSTMENT 22
7. USE 23
8. STOPS 24
9. CLEANING 25
10. ROUTINE MAINTENANCE 25
10.1 CHECK AND REPLACEMENT OF OIL IN THE TRANSMISSION ASSEMBLY 26
10.2 CONTROL AND REPLACEMENT OF THE OIL IN THE LATERAL DRIVE SUMP 27
10.3 GREASING 28
10.4 HOE REPLACEMENT 28
11. PTO DRIVE SHAFT 29
12. STORAGE AND WINTERING 29
13. SCRAPPING 29
14. QUICK CONSULTATION TABLES 30
To Next Page
Loading...
