- 31 -
Tiller CS
14.3 LUBRICATION INTERVALS
RECOMMENDED LUBRICANTS
OIL AGIP-ENI BLASIA 150
GREASE AGIP GREASE MU EP 2
A EC CAB D
E
Ref. INTERVAL IN HOURS DESCRIPTION OF THE INTERVENTION
A
AFTER THE FIRST 50
WORKING HOURS
• Replacing the bevel transmission assembly oil
• Replacing the lateral casing oil
B EVERY 8 WORKING HOURS • Grease the rotor lateral support
C EVERY 50 WORKING HOURS
• Check the oil level in the bevel gearbox transmission and top up if
necessary
• Check the oil level in the side casing and top up if necessary
D EVERY 50 WORKING HOURS
• Visually check the state of wear of the hoes and replace any damaged hoes
or all, if required
E EVERY 500 WORKING HOURS
• Replacing the bevel transmission assembly oil
• Replacing the lateral casing oil
To Next Page
Loading...
