Sicma CS/085 - 15 Spare Parts; 16 Warranty

- 32 -
Tiller CS
15. SPARE PARTS
Repairs and replacements of damaged or worn parts must be carried out using
original parts, which must be requested from the Dealer or purchased via the
website www.sicma.it. Please note that a request for spare parts must be
accompanied by the following information:
• Machine Type;
• Serial number;
• Code and description of the spare part required which can be obtained from
the Exploded View of Spare Parts (www.sicma.it);
• Requested quantity.
Given the particular stress to which the equipment is subjected and for safety
reasons, use exclusively original spare parts.
WARNING!
The use of non-original spare parts exempts SICMA from any responsibility
for damage or injuries caused to operators, third parties and property and
causes immediate forfeiture of the warranty.
16. WARRANTY
To benet from the contractual warranty provided by the Manufacture, the
operator must strictly comply with the instructions provided in the Use and
Maintenance Manual, and in particular:
• Respect the limits for use set forth by the Manufacturer;
• Must not make any changes or modications to the machine without the
written approval of the Manufacturer;
• Do not bypass the safety guards;
• Always carry out all the required maintenance operations observing intervals
and methods;
• Must only use original spare parts;
• Ensure that the personnel assigned to use the vehicle and equipment meet
the necessary skill and training requirements.