Sicma CS/085 - Delivery Letter; Tiller Identification and Manual Code

- 7 -
Tiller CS
1.3 DELIVERY LETTER
The Tiller was designed in compliance with the Directive 2006/42/EC and was
designed observing the guidelines of the technical standards regarding Tillers,
specically UNI EN ISO 4254-1:2010 and UNI EN ISO 4254-5:2009.
Therefore, the machine does not represent a danger for the operator if used
according to the instructions in this manual and on condition that the safety
devices are kept constantly e󰀩cient.
WARNING!
SICMA POINTS OUT THAT ANY CHANGES TO OR TAMPERING WITH THE
TILLER OR ANY OPERATION PERFORMED THAT IS NOT IN ACCORDANCE
WITH WHAT IS PRESCRIBED IN THIS MANUAL, IN PARTICULAR FAILURE TO
COMPLY WITH THE SAFETY REQUIREMENTS, AS WELL AS INVALIDATING
THE WARRANTY, EXEMPTS SICMA FROM ANY LIABILITY FOR DAMAGES
TO PROPERTY AND PERSONS.
1.4 TILLER IDENTIFICATION AND MANUAL CODE
For any request for assistance or information regarding the Tiller, contact SICMA
or its assistance centres, always mentioning the model and serial number, both
reported on the plate.
Properly transcribe the identication code of this manual which is shown on the
cover, so that, in the event of loss or damage to this manual, it is possible to
request a copy from SICMA or from the nearest Dealer.
If necessary, also mention the serial number of the equipment visible in the CE
marking.
903875003~01
TRANSLATED INSTRUCTIONS
TILLER
TILLER
CS /085•105•125•135•145•165•185
USER AND MAINTENANCE MANUAL
Medium xed tiller
12/2020
English
EN
TILLER
CS 165
#4134216002#
2020
276
:
:
:
(Kg):
540
(rpm):