Sicma CS/085 - 1 Introduction; Some Notes Regarding the User Manual

- 5 -
Tiller CS
Congratulations on your purchase of the
Tiller CS
The CS Tiller is manufactured by SICMA S.p.A, which has been manufacturing
agricultural machines for over 40 years.
The CS Tiller has all safety and quality requisites required for this type of
equipment.
Remember that to obtain the best performance and to optimise the productivity
features, you must be thoroughly familiar with, and observe all, the instructions
and information contained in this manual.
1. INTRODUCTION
1.1 SOME NOTES REGARDING THE USER MANUAL
It is important to know that the USER MANUAL is not an accessory of the Tiller,
but an INTEGRAL PART and a SAFETY MEASURE (EN 12100-1).
For this reason:
• Keep it in good condition;
• Store it inside the document holder canister a󰀩xed to the Tiller;
• Hand it over to any operator, maintenance technician, handler or subsequent
owner.
In this way, the Tiller can be used at its full potential in utmost safety.
The manual must remain intact, complete with all its pages and must be kept
away from moisture and heat; during its consultation, prevent it from becoming
wet or dirty to guarantee optimum legibility.
In case of loss or deterioration of this manual, request a copy from the Manufacturer
or from the nearest Dealer including the identication code on the cover.
To ease consultation, the manual has been divided into parts, so that every phase
can be easily understood.
With these precautions, SICMA intends to unequivocally draw the operator's
attention to any hazardous situations that may arise.
Some of the devices described in this manual may not be present on your machine,
as they vary depending on the chosen set up and the market of destination.
We also remind you that the information, descriptions and illustrations contained
in this manual reect the state of the art at the time of marketing the machine.
The Manufacturer reserves the right to make, at any time, any changes to the
machines for technical or commercial reasons. These changes do not require the
Manufacturer to act on vehicles sold so far, nor to consider the present publication
inadequate.
Any additions that the Manufacturer deems appropriate to provide later, will need
to be kept with the manual and considered to be part of it.
WARNING!
The drawings and any other documents delivered together with the tiller are the
property of SICMA which reserves all rights thereof and, therefore, cannot be
disclosed to third parties without its written consent. Therefore, any reproduction,
even partial, of the text and illustrations is strictly prohibited.
903875003~01
TRANSLATED INSTRUCTIONS
TILLER
TILLER
CS /085•105•125•135•145•165•185
USER AND MAINTENANCE MANUAL
Medium xed tiller
12/2020
English
EN