- 8 -
Tiller CS
1.5 GENERAL DELIVERY NOTES
The Tiller, its parts and accessories are normally delivered by lorry or container.
Upon receipt of the machine, check that the details of delivery correspond to the
order specications (see packing slip or packing list) and that there is no damage
to the Tiller or to its accessories.
Spare parts or ancillary equipment are sometimes placed in separate containers.
In the event of damage or missing parts immediately inform SICMA or its local
representatives, the carrier or its insurance agent, providing details and/or
photos.
The Tiller is delivered by SICMA equipped with the following:
1- PTO DRIVE SHAFT;
2- TILLER USE AND MAINTENANCE MANUAL;
3- PTO DRIVE SHAFT USE AND MAINTENANCE MANUAL;
4- CE DECLARATION OF CONFORMITY.
● PM14 ● PM57 ● PM80E
ES • Manual de instrucciones
GR • Руководство по эксплуатации
33
EC DECLARATION OF CONFORMITY
The company
Sicma s.p.a. - C.da Cerreto, 39 - 66010 Miglianico (Ch) - Italy
Tel.: +39 0871 95841 - Fax: +39 0871 950295
e-mail: info@sicma.it - http://www.sicma.it
hereby declares that:
product: TILLER
model: CS
serial number:
complies with the essential requirements for safety and health of Directive 2006/42/CE.
To fulfil the above mentioned Directive have been applied the following harmonised standards:
-UNI EN ISO 4254-1:2010, EN ISO 4254-5:2009, UNI EN ISO 12100-1:2009, UNI EN ISO 12100-2:2009
and the technical standards and specifications
- ISO 11684:1995, ISO 13852:1996, UNI 9456:1989.
The person authorised to compile the technical file is Mr. Lorenzo Aurora
Chiara Aurora
AMMINISTRATORE UNICO
Miglianico, 15/03/2020
44
903875003~01
TRANSLATED INSTRUCTIONS
TILLER
CS /085•105•125•135•145•165•185
USER AND MAINTENANCE MANUAL
Medium xed tiller
12/2020
English
EN
22
11
1.6 TILLER COMPOSITION
Ref. Description
1 Frame
2 Lower 3-point hitch
3 Upper 3-point hitch
4 Drive shaft extension pipe
5 3-point hitch mast
6 Rotor
7 Hoes
8 Side skids
9 Drive sump
10 Bonnet
11 Drive shaft hook
12 Document canister
1112
To Next Page
Loading...
