Decommissioning and disposal
11.2 Disposal
Synchronous/induction motors 1PH813
Operating Instructions, 04/2009, 610.48000.22
85
Process materials and chemicals
Sort the process materials and chemicals for recycling according to whether they are for
example:
● Oil
● Grease
● Cleaning substances and solvents
● Paint residues
● Anti-corrosion agent
Dispose of the separated components according to local regulations or via a specialist
disposal company. The same goes for cloths and cleaning substances which have been
used while working on the machine.
Packaging material
● If necessary, contact a suitable specialist disposal company.
● Wooden packaging for sea transport consists of impregnated wood. Observe the local
regulations.
● The foil used for water-proof packaging is an aluminum composite foil. It can be recycled
thermically. Dirty foil must be disposed of via waste incineration.
11.2.6 Disposing of insulating liquid
Used MIDEL 7131® or residue of insulating liquid can be incinerated in a suitable plant. The
waste disposal code is 130309 ("readily biodegradable insulating and heat transmission
oils").
Arrange for the insulating liquid to be disposed of by a waste disposal company.
To Next Page
Loading...
