Siemens Albatros2 Technical Manual

Plant operation, quick access
5
Operating heating/cooling
45
Siemens Graphical User Interface UI400 CE1U2348en
Building Technologies 2014-06-03
Enter settings
l The temperature page (
) is selected on the navigation bar.
Selectable zones.
The living zone cannot be selected or edited, if the room or operator unit is
assigned to only one living zone or jointly operates all assigned living zones.
Proceed as follows to change living zone:
1. Turn the control knob and select the living zone.
2. Press the control knob.
The living zone setting is selected and is displayed inverted.
3. Turn the control knob to select another living zone.
4. Press the control knob to confirm the selected living zone.
a Information and settings for the selected living zone is now displayed below the
dash.
Prerequisites
Change living zone

Siemens Albatros2 Specifications

General

Brand	Siemens
Model	Albatros2
Category	Recording Equipment
Language	English