5
Plant operation, quick access
Operating heating/cooling
46
Siemens Graphical User Interface UI400 CE1U2348en
Building Technologies 2014-06-03
Settings:
l Protection: The living zone remains protected (frost protection, protection
against heat accumulation).
l Automatic: The living zone is operated as per the time switch program.
Automatic energy savings functions (e.g. summer/winter mode).
l Reduced: The living zone is operated continuously at a reduced setpoint.
l Comfort: The living zone is operated continuously at the comfort setpoint.
The operating mode can be individually set per living zone.
Use plant/zone switch on start page.
It is easier to use the plant/zone switch on the start page if you want to operate
the entire building in automatic mode.
Proceed as follows to set the operating mode for a living zone:
w The desired living zone is selected.
1. Turn the control knob until the operating mode setting (e.g. Automatic) is
preselected.
2. Press the control knob.
The operating mode setting is selected and is displayed inverted.
3. Turn the control knob to select another operating mode setting.
4. Press the control knob to confirm the setting.
Set operating mode
To Next Page
Loading...
Need help?
General
