47
Siemens Graphical User Interface UI400 CE1U2348en
Building Technologies 2014-06-03
Settings:
l Temporarily 'warmer' or 'cooler' allows the user to temporarily adjust the
temperature for special situations.
l A temporary adjustment is made when selecting 'warmer' or 'cooler';
afterwards, the controller returns to the presettings.
l Setting '...' disables or switches off the function.
Proceed as follows to adjust the temperature for a living zone to your needs:
w The desired living zone is selected.
1. Turn the control knob until the temporary setting is preselected.
2. Press the control knob.
The temporary setting is selected and is displayed inverted.
3. Turn the control knob to the right to temporarily operate the living zone at a
warmer temperature.
4. Turn the control knob to the left to temporarily operate the living zone at a
cooler temperature.
5. Press the control knob to confirm the setting.
Proceed as follows to adjust the comfort setpoint:
w The desired living zone is selected.
1. Turn the control knob until the comfort setpoint setting is preselected.
2. Press the control knob.
The comfort setpoint setting is selected and is displayed inverted.
3. Turn the control knob and set the desired comfort temperature.
4. Press the control knob to confirm the setting.
Adapt temperature
temporarily
Adjust comfort setpoint
To Next Page
Loading...
Need help?
General
