Siemens AOP - Page 31

31
AOP Operating Instructions – Issue 07/05
6SE6400-5AP00-0BB0
The user is then presented with the AOP reset screen:
3. Using the
and keys select Off or On.
4. Press
to confirm.
The user is then presented with the parameter reset screen:
5. Press
to confirm the AOP reset and the deletion of the inverter
parameter sets stored within the AOP’s memory.
Or
Press
to perform the AOP reset without deleting the inverter
parameter sets stored within the AOP’s memory.
Caution
The AOP reset function will return all internally stored AOP specific
data to its factory default settings, this includes such functions as the
timer control settings etc.
Pressing the and keys simultaneously, at any time will display
the relevant help screens to assist the user.