18 General Start-up
ARCADIS Varic SPR2-310.815.01.05.02 Siemens AG
02.05 CS SD 24
Page 18 of 48
Medical Solutions
Function check of the emergency stop switches 0
• Connect the system to the voltage and boot it.
• Click "Emergency" for the patient registration.
• Operate the EMERGENCY STOP switch on the C-arm.
• The safety switch moves audibly and the following message appears on the lower left
monitor edge: "The emergency stop has been pressed"
• Disengage the EMERGENCY STOP switch.
• The safety switch moves audibly and the following message appears on the lower left
monitor edge: "The emergency stop switch has been released."
• Document the function of the EMERGENCY STOP switch in the "Test protocol, C-arm
movement and emergency stop (C-arm movement and emergency stop / p. 40).