Siemens AG SPR2-310.815.01.05.02 ARCADIS Varic
02.05 CS SD 24
Final Work Steps 37
Page 37 of 48
Medical Solutions
5-
4Final Work Steps
Paper printer (optional) 0
Sony printer LPR-1000MD 0
Perform the following steps according to the "Start-up Manual" of the printer:
• Unpacking (see the chapter "Preparation").
• Installing the head cassette (see the chapter "Preparation").
Please note: Remove retaining mechanisms and safety mechanism from the head
cassette.
• Installing the ink cartridges (see the chapter "Preparation").
• Switching on the printer (see the chapter "Preparation").
Please note:Place the printer in advance on the monitor cart, connect the power and
USB cables (ready for use in the printer slot of the cart) to the printer, and set the power
switch to "1".
• Installing the head cleaning unit (see the chapter "Preparation").
• Installing the automatic paper feed tray (see the chapter "Preparation").
NOTE
Insert printer paper with the white side facing down.
Remove the protective film from the ink cartridges.
Codonics printer 1660L 0
Perform the following steps according to the "User Manual" of the printer:
• Transport instructions (see preface).
Please note:Unpack the printer and remove the two transport pins. Place the printer in
the cart, connect the power cable and the 25-pin plug to the printer (cables are ready for
use in the printer slot of the cart), and set the power switch to "1".
• Install the print media>(General Start-up / p. 14)
NOTE
Keep the transport safety materials. They have to be used when re-
placing or shipping the printer.
Sony printer UP-D72 X 0
Perform the following steps according to the user manual for the printer (CD-ROM):
• Unpack the printer.
• Fill the paper tray with paper (follow instructions on paper package).
• Plug in the USB cable.
To Next Page
Loading...
Need help?
General
