Siemens ARCADIS Varic - Installing the ON;OFF Assembly; Preparations and Wiring Overview

Siemens AG SPR2-310.815.01.05.02 ARCADIS Varic
02.05 CS SD 24
General Start-up 19
Page 19 of 48
Medical Solutions
Checking the temperature indicator 0
• Check the temperature indicator on the outside of the image intensifier housing.
¹ If the inner, square field of the indicator is white, the temperature has not been
exceeded. Remove the temperature indicator.
¹ If the indicator is discolored (inner field black), proceed according to IQ docu-
ment RXD0-000-038.01.xx.xx.