Camera settings
29
Siemens AG 03.2011
9.2.7 SPECIAL
<SPECIAL MENU>
SYNC
PHASE
D/N MODE
D/N DELAY
WHITE DET.
LEVEL
END
SYNC Select INTERNAL or LINE LOCK mode
PHASE Adjust SYNC PHASE in LINE LOCK MODE
D/N MODE Select D/N, COLOUR, BW, or EXT mode
D/N DELAY Select delay of IR filter in D/N mode: 5 s, 10 s, 20 s
WHITE DET Start of white pixel detection function. The iris will be closed automatically and
return to the normal state once white detection is finished.
LEVEL Adjust threshold level: 1 – 15
END Back to the next higher menu level
9.2.8 EFFECT
<EFFECT MENU>
SHARPNESS
NEGATIVE
D-FLIP
FREEZE
HI-RES
2DNR
3DNR
END
SHARPNESS Adjust image sharpness: 0 – 15
The lower the value, the softer the image, and the higher the value, the sharper
the image
NEGATIVE Select negative or positive mode
D-FLIP Select digital flip function: vertical flip/horizontal flip/180° rotation
FREEZE Select real or still mode
HI-RES Select high-resolution mode: Low/Mid/High
2DNR Select 2D noise reduction level: Off/01 – 7
3DNR Select 3D noise reduction level: Off/01 – 31
END Back to the next higher menu level
To Next Page
Loading...
