Siemens CP1430 TCP - Commissioning Procedures

2 Engineering
Ethernet Communication (ISO on TCP) between SIMATIC S5 and
SIMATIC S7-1500 Controllers
Entry-ID: 109482475, V1.2, 07/2019
83
© Siemens AG
2019 All rights reserved
2.9 Commissioning
2.9.1 Overview of the communication relations
The example programs are designed in such a way that all example scenarios are
completely included in the S5 project. They can be enabled or disabled via enable
bits. The following overview shows how all communication resources and the
enable bits are assigned to the corresponding scenarios in the SIMATIC S5-CPU.
Table 2-24
SIMATIC S5
SIMATIC S7
Scenario
S5 block FB
S5 enable bit
CP1430 TCP A
-NR
Local / remote TSAPs
OUC interface
Local connection ID
1
FB 40
M 130.5
FETCH: 113
WRITE: 114
CP1543-F
CP1543-W
-
-
-
-
2a
FB 33
M 130.3
SEND: 133
RECV: 33
CPU_150a
CPU_150a
TSEND/
TRCV
105
2b
FB 34
M 130.4
SEND: 143
RECV: 43
CPU_150b
CPU_150b
TSEND/
TRCV
5
3
FB 32
M 130.2
SEND: 122
RECV: 22
CP1543-2
CP1543-2
TRCV_C/
TSEND
7
4a
FB 30
M 130.0
SEND: 103
RECV: 3
CP1543-0
CP1543-0
TSEND/
TRCV
104
4b
FB 31
M 130.1
SEND: 102
RECV: 2
CP1543-1
CP1543-1
TSEND/
TRCV
4
5
FB 35
M 130.6
SEND: 153
RECV: 53
CPU_150c
CPU_150c
TSEND_C/
TRCV
6