Step by step
Miscellaneous functions
104
Room Monitor
1
The Room Monitor feature uses a telephone handset as
a microphone to capture audio signals in a room.
To a c t i va t e
N Press this key.
Select and confirm.
or
*88 Enter the code to activate the Room Monitor feature.
^ Lift the handset and position it towards the object to be
monitored.
or
n Press this key. The LED comes on
To d e a c t i va t e
\ Replace the handset.
or
n Press this key. The LED goes off.
Room Monitor
... From an extension
j Enter the extension number for the room you want to
monitor (e.g., 11/101).
w [ Wait. The user calls the extension assigned to the fea-
ture to hear the audio signals present.
[1] When the Fax/DID module is installed, you can monitor an environ-
ment even from an external telephone. After the answering mes-
sage completes, enter the extension number assigned to the
feature, then enter the extension password (same as the electron-
ic lock).
This cannot be activated for an overflow extension or members of
a Hunt group.
*88=BABYPHONE?
To Next Page
Loading...
