Step by step
Functions used during calls
56
Parking
1
The Parking feature can place up to 10 internal or exter-
nal calls on hold and answer these at any extension.
Required: A call must be in progress.
N Press this key.
Select and confirm.
or
N Press this key.
*56 Enter the code for Parking a call.
or
S Press the "PARK" key.
0 ... 9 Select a Parking slot (e.g., 0).
\ Replace the handset.
or
n Press this key. The LED goes off.
Recovering a parked call
N Press this key.
Select and confirm.
or
#56 Enter the code to retrieve the call.
or
S Press the "PARK" key.
0 ... 9 Select a Parking slot (e.g., 0).
[ Start conversation.
[1] If the slot selected is busy, a rejection tone is heard.
If the call is not recovered from Parking, it will return to the exten-
sion that put it there after a certain time.
*56=Parking?
#56=RTRV Parking?
To Next Page
Loading...
