Functions used when making calls
43
Step by step
j
Enter the code to access an external line (e.g., 0).
w Wait for an external line dial tone.
j Enter the external number you want to call.
w [ Wait for the call to be answered. Start conversation.
Timer for outgoing external calls
1
This setting specifies a maximum time for the duration
of an outgoing external call for each extension.
The time count starts upon connection of a call and will
never restart while the call is in progress (e.g., when
there is a transfer). Once the specified time expires, the
call is automatically disconnected.
Required: This feature must have been configured and
activated for the extension.
j Enter an external number.
w [ Wait for the call to be answered. Start conversation.
w Timer for the specified time period is initiated.
Before a call is disconnected by the timer, a 10-second
warning tone is sent to the extension and the message
"TIME EXCEEDED" is shown on the display.
\ Once the specified time has elapsed the call is discon-
nected.
When the LCR or ACS is activated, the exten-
sions receive a false line tone for external dialing.
[1] See Programming an extension – Timer for outgoing external calls,
in the programming manual
TIME EXCEEDED
To Next Page
Loading...
