Step by step
Functions used during calls
58
Suffix dialing
1
Suffix dialing allows an extension to send information or
MF commands during a call (e.g: for telebanking).
Required: The call is in progress and the system ac-
cessed is ready to receive the information/codes.
j Enter the information requested by the answering ser-
vice.
w Wait for confirmation of the data.
\ When the consultation is completed, replace the hand-
set.
or
n Press this key. The LED goes off.
Flash on analog trunk
The flash on external line feature allows the caller to
send a flash signal when making an external call (e.g.:
master PABX commands).
Required: An external call must be in progress.
N Press this key.
Select and confirm.
or
*51 Enter the code for sending a flash signal over the exter-
nal line.
or
S Press the "FLASH" key.
[ Proceed according to the instructions provided by the
system accessed .
[1] This feature differentiates the numbers entered from system ser-
vice numbers.
MORE FEATURES? f
*51=FLASH?
To Next Page
Loading...
