Step by step
Functions used during calls
48
Functions used during calls
Consultation
1
The Consultation feature allows the extension to make
a consultation to a third party when a call is in progress.
At the same time, it prevents the first caller from listen-
ing to the conversation.
Required: A call must be in progress.
Confirm.
or
S Press the "CONSULT" key
j Enter the extension number (e.g. 11/101) or dial the ac-
cess code for an external line (e.g., 0) then the external
number.
w [ Wait for the call to be answered. Start a consultation.
To return to the first call...
Confirm.
or
w \ Wait for the consulted party to replace the handset.
If the consultation extension is busy or does not an-
swer, or if you want to return to the first call before
answering...
Confirm.
or
*0 Enter the code to return to the first call.
w [ Wait to return. Proceed with the conversation.
[1] When the handset is replaced during a consultation, the first call is
transferred to the extension that was consulted.
CONSULT?
QUIT AND RET?
RETURN TO HELD CALL?
To Next Page
Loading...
