Step by step
Functions used when making calls
38
Hotline
1
The Hotline feature allows an extension to automatically
generate a call to a pre-programmed number in the sys-
tem speed dialing as soon as the handset is lifted.
^ Lift the handset.
or
n Press this key. The LED comes on.
w [ Wait for the call to be answered. Start conversation.
Warmline
2
Warmline is the length of time the extension should
wait to call the first number configured as a Hotline. As-
suming the timeout is 9 seconds, the call will be made
9 seconds after the handset is lifted. However, if during
the 9 second time interval a key is pressed on the
phone keypad, the call to the Hotline will be canceled.
Each extension can have a different timeout for enabling
a Hotline. This timeout may vary from 0 to 9 seconds.
^ Lift the handset.
or
n Press this key. The LED comes on.
w [ Wait for the call to be answered. Start conversation.
Calling an attendant console (AC)
3
An attendant console can be called at any time for mak-
ing a call or simply for consultation.
9 Enter the code for calling the attendant console.
w [ Wait for the call to be answered. Start conversation.
[1] Extensions configured to use the Hotline feature cannot dial any
other internal or external numbers. However, they are able to re-
ceive calls as usual (see Programming an extension - Hotline in the
Programming manual).
[2] Extensions configured to use the Warmline function are able to dial
all other internal or external numbers, as well as receive calls as
usual (see Programming an extension - Warmline in the Program-
ming manual).
[3] When no extension is programmed as an attendant and "9" is en-
tered, a busy signal is heard.
To Next Page
Loading...
