Step by step
Functions used when making calls
22
...Using a group of external lines
1
An extension can originate external call or calls to a
Master PABX through a group of external lines.
j Enter the number of the appropriate group of external
lines to access an external line.
•
0 or 890 up to 899
= group of external lines;
w Wait for a dial tone.
j Enter the external number you want to call.
w [ Wait for the call to be answered. Start conversation.
... When a group is busy
If an overflow group was configured when the system
was programmed, the call is made using a second
group of external lines.
The second group of external lines takes into account
the extension’s class of service.
Switching to speakerphone
Conversation using the handset
n and \ Press and hold this key while placing the handset on the
hook. Release the key and resume the call.
Switching to Handset
Speaking with the speakerphone
^ and [ Lift the handset and resume conversation.
[1] When operating as a Sub-PABX for external calls or for calling ex-
tensions of a Master PABX, select the group of external lines be-
fore selecting the second external access code (0...9 or 00...99).
Or, select the extension number, as appropriate (see Important
Programming Data - Assigning groups of External Lines to Exten-
sions in the Programming manual). When a group of external lines
is programmed as a Sub-PABX a false dialing tone will not be gen-
erated.
Overflow group for external calls (see in Programming manual, Ex-
ternal line settings- Overflow for a group of external Lines).
To Next Page
Loading...
