Siemens HiPath 1120 - Page 85

Functions used when receiving calls
85
Step by step
or
*401 Enter the code to login or logout of the UCD group.
or
#401 Enter the code to login or logout of the UCD group.
or
S Press the "UCD GROUP LOGON/LOGOFF" key.
or
R
If the extension belongs to more than one group
Select and confirm.
or
or
*401 Enter the code to login or logout of the UCD group.
or
#401 Enter the code to login or logout of the UCD group.
or
S Press the "UCD GP LOGON/LOGOFF" key.
or
R
If an X appears next to the group number (e.g., 790) it
means that the ringing signal for this group is activated.
If a name has been stored for this group, it will be dis-
played (if configured by the system’s support techni-
cian).
or
If an X does not appear, it means that the ringing signal
is deactivated.
GP LOGOFF?
GP LOGON?
GP LOGOFF?
790 X (Name)
790 (Name)