Need help?Do you have a question about the Siemens Inhab Energy and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | Inhab Energy |
| Category | Measuring Instruments |
| Language | English |
Explains the purpose of the safety alert symbol used for potential injury hazards.
Highlights critical hazards like dangerous voltage and necessary precautions for safe installation.
Outlines prerequisites, safety measures, and recommended tools for installation.
Lists all items provided with the Siemens Inhab Energy monitor kit.
Details the location and function of all monitor ports and connectors for wiring.
Guide to downloading and setting up the Siemens Inhab Energy mobile application via QR code.
Instructions for safely de-energizing the electrical panel by turning off breakers.
Guidance on selecting a suitable location for the energy monitor within the electrical panel.
Steps for configuring wired LAN connectivity for the Inhab Energy monitor.
Steps for configuring Wi-Fi connectivity for the Inhab Energy monitor.
Instructions for connecting main CTs in a non-solar panel setup.
Instructions for connecting main CTs in a breaker-fed solar system.
Instructions for connecting main CTs in a line-side tap solar system.
Connects the voltage sensing harness to the monitor's left-side port.
General guidance on connecting the wire harness to breakers based on system types.
Specific wiring instructions for split phase homes with two empty breakers.
Specific wiring for split phase homes with no empty breakers.
Specific wiring for 3-phase systems with three empty breakers.
Specific wiring for 3-phase systems with no empty breakers.
Connects branch CTs to the monitor for load monitoring.
Discusses considerations for monitoring multi-pole breakers with CTs.
Explains how to configure branch CTs for solar generation monitoring.
Recommends documenting the installation for support purposes.
Final steps to secure the panel cover and restore power to circuits.
Guides the user to finish configuration using the mobile application.
Addresses issues where the app cannot detect the Inhab Energy device.
Troubleshoots problems with the app not receiving live measurements.
Solves issues with the app not displaying solar or grid energy data.
Explains the meaning of Wi-Fi LED lights for connection status.
Explains the meaning of Wired LAN LED lights for connection status.
Lists technical details for the Inhab Energy monitor unit.
Provides technical specifications for the main CTs.
Provides technical specifications for the branch CTs.
Details FCC regulations regarding radio frequency interference for digital devices.
To Next Page