3.8 iService functions
iService is a software tool designed for the after sales service, supporting the repair of
home appliances. The software can establish wired or wireless connection to the appli-
ance and provides one or more of the following functionalities, depending on what has
been supplied for the individual appliance The software only works, if the compatible
hardware is connected to the computer and the driver software for the hardware is in-
stalled.
Overview of iService functions (available depending on appliance):
¡ monitoring of internal components and sensors
¡ remote control of internal components and test programs
¡ read out of internal statistics and failure memory
¡ writing configuration codes to the internal memory of the appliance
¡ flashing / re-flashing / updating one or more modules of the appliance, using rom-
boot-loader
¡ hardware-measurements: typical multi-meter applications and safety tests accord-
ing to EN0701
In the next sub-chapters there are described some of the functions of iService with re-
frigeration appliances specifics. Three zones fridge-freer is taken as an example.
3.8.1 iService overview
3.8.1.1 Monitoring and control function
Fig.14: iService monitoring - window overview
1 0 °C compartment evaporator heater
2 Refrigerator compartment LED light
3 Refrigerator compartment temperature in °C
4 Ambient temperature in °C
5 Refrigerator compartment door state
6 0 °C compartment temperature in °C
7 0 °C compartment evaporator temperature in °C
8 0 °C compartment fan
9 Freezer compartment temperature in °C
Design and function
2020-08-03_58300000002379_ara_en_p Copyright by BSH Hausgeräte GmbH Page18of73
To Next Page
Loading...
