Test
7.1 Performing customer service test program
Valid for all appliances with on-board customer service test program.
Customer service test program must be performed before any repair ac-
tion (e.g. component exchange, electronic flashing).
Customer service test program details are described in service docu-
ments "Check routine (ASP)".
1. Check if customer service test program is available in repaired appliance.
2. Check all components with test program.
3. Check power consumption of consumers (compressor, motor, fan, heaters, etc.).
4.
If specific failure is detected in the test program.
- Initiate repair based on test program outcome.
5.
If there is no failure detected in the test program.
- Initiate required repair action.
6.
If repair is finished.
1. Start test program second time.
2. Check components and power consumption.
Test
2020-08-03_58300000002379_ara_en_p Copyright by BSH Hausgeräte GmbH Page50of73
To Next Page
Loading...
