6.3 Checking temperature indicator (Sticker "OK")
Temperature indicator (Sticker "OK") determines the required controller position for the
cooling zones in the cooling compartment.
Fig.18: Sticker "OK" position
1. Check temperature indicator.
In case of temperatures below 4 °C, the black dot becomes green and "OK" is
displayed.
2.
If the sticker does not indicate “OK”.
- Gradually reduce the temperature.
When the appliance is switched on, it may take 12 h until the desired
temperature is reached.
6.4 Measuring energy consumption
Required tools:
Energy cost measuring device VOLTCRAFT, Energy Logger 4000 [15000102]
Specified energy consumption was determined in the lab under standard conditions.
Following factors affect measurements in the household:
¡ Fluctuating ambient temperature (day / night)
¡ Unchecked heat input due to door openings during measurement
¡ Hear radiation, e.g. from adjacent cookers
¡ Measurement period too short
¡ Fluctuating temperatures in the compartment caused by control cycles
Prerequisite:
Ambient temperature 25 °C.
Cold-storage compartment temperature 8 °C to 12 °C.
Refrigerator compartment 5 °C.
Fresh food compartment -2 °C to 3 °C.
Freezer compartment -18 °C.
No door openings.
Full load.
1. Connect appliance to energy measuring device.
2. Measure energy consumption 24 h.
Measuring technology
2020-08-03_58300000002379_ara_en_p Copyright by BSH Hausgeräte GmbH Page49of73
To Next Page
Loading...
