Siemens KG39EAI43 - Concerning this document; Important information; Explanation of symbols

Concerning this document
1.1 Important information
Read and observe chapter 2 "Safety" before performing any work!
1.1.1 Purpose
These repair instructions form the basis for a systematic and safety conscious proced-
ure for the repair of domestic appliances.
These repair instructions include information about troubleshooting and repair.
1.1.2 Target group
These repair instructions are intended for persons who are familiar with equipment
technology and were instructed by BSH or an authorised body:
¡ Service technicians for the repair of domestic appliances
¡ Pre-assemblers in the spare part stockroom when determining required spare
parts
¡ Call centre employees during order acceptance
1.1.3 Other applicable documents
The following documents include additional relevant repair information:
¡ General repair instructions
¡ Error codes and service programs
¡ Circuit diagrams
¡ Exploded drawings
¡ Parts lists
¡ Repair videos
1.2 Explanation of symbols
1.2.1 Danger levels
The warning levels consist of a symbol and a signal word. The signal word indicates
the severity of the danger.
Warning level Meaning
Danger
Non-observance of the warning message
will result in death or serious injuries.
Warning
Non-observance of the warning message
could result in death or serious injuries.
Caution
Non-observance of the warning message
could result in minor injuries.
Notice
Non-observance of the warning message
could result in damage to property.
Table1: Danger levels
1.2.2 Hazard symbols
Hazard symbols are symbolic representations which give an indication of the kind of
danger.
The following hazard symbols are used in this document:
Hazard symbol Meaning
General warning message
Danger from electrical voltage
Risk of explosion
Danger of cuts
Concerning this document
2020-08-03_58300000002379_ara_en_p Copyright by BSH Hausgeräte GmbH Page4of73