Siemens KG39EAI43 - Page 70

6.
If logo is single letters logo:
1. Stick logo on the dedicated position of door (1).
2. Move hand roller (e.g. rubber-coated steel roller or hard rubber roller) 3-4
times over the logo (2).
7.
Adhesive takes time to build up liability!
1. Wait 10 min (1).
2. Carefully remove protective foil (2).
Single letter logo is installed.
Repair
2020-08-03_58300000002379_ara_en_p Copyright by BSH Hausgeräte GmbH Page70of73