187/245
Building Technologies Division Basic Documentation LME7... CC1P7105en
Infrastructure & Cities Sector 23 Operation via AZL2… 29.11.2011
23.8.3 Changing the OEM's password
P
Vh
min
s%
Bild 60/070 7
Parameter 042: blinks.
Press
reset
to go to level c: for password changes.
reset
P
Vh
min
s%
Bild 165/1107
Letter c: for confirmation appears blinking.
Proceed as described in section Entering the password
and enter the former password.
After entry of the last character, the password must be
confirmed by pressing
reset
.
reset
P
Vh
min
s%
Bild 60/070 7
Letter n: for new appears blinking.
Proceed as described in section Entering the password
and enter the new password (5 characters).
After entry of the last character, the password must be
confirmed by pressing
reset
.
reset
P
Vh
min
s%
Bild 62/070 7
Letter r: for repeat appears blinking.
Proceed as described in section Entering the password
and repeat entry of the new password.
After entry of the last character, the password must be
confirmed by pressing
reset
.
P
Vh
mi n
s%
Bild 59/0707
SEt confirms that the new password has been saved.
P
Vh
min
s%
Bild 60/070 7
Parameter 042: blinks again.
To Next Page
Loading...