Siemens LME72.000A2 - Errors During the Restore Process; Reset

218/245
Building Technologies Division Basic Documentation LME7... CC1P7105en
Infrastructure & Cities Sector 25 Operation via internal LED 29.11.2011
25.8.1 Errors during the restore process
Alternately with
or
or
Display shows alternately rSt and Er1, Er2 or Er3.
For meaning of a possible cause, see chapter Error code list
with operation via internal LED.

Note:
During the restore process, all settings and parameters are written from the program module to
the basic unit’s onboard memory. In the process, it is possible that previous program
sequences, parameters and settings in the onboard memory will be overwritten!
25.8.2 Reset
nfo
>1 s
LCD Bild 02/0908
When pressing
nfo
for 1...3 seconds, OFF is displayed.
When the button is released, the basic unit is reset.

Note:
For meaning of the error and diagnostic codes, see chapter Error code list...