Technical Instructions LMV Series
Document No. LV3-1000
Section 1 Page 6 SCC Inc.
Air Damper Assembly
Actuator – Qty (1) Required
Choose one of the following actuators for the air damper. For more information, refer to
Document No. N7813.
SQM33.550A9
27 in-lb torque, 10mm “D” shaft, 5-80 seconds
SQM33.750A9
90 in-lb torque, 10mm “D” shaft, 17-80 seconds
SQM33.550A9-N4
Same as SQM33.550A9 but with a NEMA 4 seal
SQM33.750A9-N4
Same as SQM33.750A9 but with a NEMA 4 seal
Coupling – Qty (1) Required (Provided With Some Mounting Brackets – See Below)
Zero-lash, flexible couplings are available for SQM33… actuators. For more information, refer
to Document No. CPBK-1000.
CCM10DCA…
Flexible couplings for SQM33… actuators
Mounting Bracket Kits - Optional
Modular bracket kits are available to assist in mounting an SQM33… actuator to a variety of
valves or air dampers. A coupling is necessary when using a modular bracket kit. For more
information, refer to Document No. CPBK-2000.
BR-AS…
Modular bracket kits for mounting SQM33…
actuators to a variety of valves or dampers
To Next Page
Loading...
