Siemens milltronics MFA 4P Instruction Manual

7ML19985FM01 MFA 4p - INSTRUCTION MANUAL Page 21
mmmmm
Probes
Interconnection Diagram for the XPP-5
1=1
11
R. CLOSS
B. GRAY
N. T. S.
S. NGUYEN
XPP-5
INTERCONNECTION DIAGRAM
2365013102
23650131
2
RWG
RWG
RWG
SN
SN
SN
27/00
MARCH
APRIL
18/00
JULY
11/00
0
1
2
FOR CONSTRUCTION
REVISED CABLE AND TERMINAL CONNECTOR
PER ECN #00-000-0-0037
REVISED HOUSING THREADS
PER ECN #00-000-0-0070
NOTES :
2) A SEAL SHALL BE INSTALLED WITHIN 50 mm OF THE XPP-5 CONDUIT HUB
FOR CLASS I, DIV. 1 HAZARDOUS LOCATION ONLY.
3) INSTALLATION SHALL BE DONE IN ACCORDANCE WITH
CANADIAN ELECTRICAL CODE PART 1 REQUIREMENTS.
4) DO NOT EXPOSE THE XPP-5 TO DIRECT SUNLIGHT, OTHERWISE
PROVIDE SUN SHIELD.
5) STATIC HAZARD, DO NOT RUB WITH DRY CLOTH.
1) THE XPP-5 CABLE MUST BE TERMINATED IN AN AREA EXTERNAL
TO HAZARDOUS LOCATIONS, CLASS I, DIV 1, GR. & CLASS II, DIV 1, GR. E,F,G.A,B,C,D
NON - HAZARDOUS LOCATION
NON - HAZARDOUS LOCATION
HAZARDOUS LOCATION
HAZARDOUS LOCATION
MILLTRONICS
CONTROLLER
MILLTRONICS
CONTROLLER
JUNCTION BOX
CLASS I & II
XPP-5
XPP-5
METAL CONDUIT
METAL CONDUIT
CERTIFIED
CONDUIT
SEAL
FITTING
CERTIFIED
CONDUIT
SEAL
FITTING
CERTIFIED
CONDUIT
SEAL
FITTING
CERTIFIED
CONDUIT
SEAL
FITTING
CLASS I, DIV 1, GROUPS A,B,C,D
CLASS II, DIV 1, GROUPS E,F,G
CLASS I, DIV 1, GROUPS A,B,C,D
CLASS
II, DIV 1, GROUPS E,F,G
7ML19985FM01.book Page 21 Wednesday, May 21, 2008 2:17 PM

Siemens milltronics MFA 4P Specifications

General

Brand	Siemens
Model	milltronics MFA 4P
Category	Security System
Language	English