Siemens MOBILETT Plus - Motor Unit Replacement

Motor drive units 11 - 5
Siemens-Elema AB SPR8-215.898.01 Page 5 of 6 MOBILETT Plus / - E/ - M
Solna, Sweden Rev. 05 01.02 SPS-UD
Replacing the motor unit 11
• Remove the side and front covers.
• Remove the motor drive unit or battery pack depending on the side where the motor is
being replaced. Refer to (Fig. 7) for electrical connections.
• Tilt the unit and support the affected side with a block of wood.
Fig. 7 Motor power unit, electrical connections
Fig. 8 Removing wheel and motor
Equipment required: Ratchet with Allen socket
MOB00500
Power supply
Right motor
Left motor
Battery
Motor control
buttons
Battery indicator
MOB00480