Mechanical systems 10 - 11
Siemens-Elema AB SPR8-215.898.01 Page 11 of 28 MOBILETT Plus / - E/ - M
Solna, Sweden Rev. 05 01.02 SPS-UD
MOBILETT Plus and Plus M only
Adjustment and replacement of the turn plate 10
• The turn plate mechanism must be removed for adjustment or replacement.
• Ensure compliance with the safety information in the section:
"Safety information and protective measures".
Never work with the system open if the capacitor is charging or
has just been charged.
The capacitor bank may still be charged even if the system is
switched OFF and the mains cable is disconnected.
Life-threatening electric shock hazard exists.
See Chap.:
"Protective measures when working on the capacitor bank".
Equipment required: 2 pieces of wood (50 x 70 x 500 mm)
To Next Page
Loading...
Need help?
General
