Siemens MOBILETT Plus - Page 114

114 pages

To Previous Page

MOBILETT Plus / - E/ - M SPR8-215.898.01 Page 2 of 2 Siemens-Elema AB

Rev. 05 01.02 SPS-UD Solna, Sweden

12 - 2 Changes to previous version

This page intentionally left blank.

Main Page

Table of Contents3
Training of Customer Support Engineers5
Text Emphasis5
Symbols5
Required Documents6
Required Tools, Measurement and Auxiliary Devices6
Lubricants6
Safety Information and Protective Measures7
- Protective Measures When Working on the Capacitor Bank8
Monitoring the Kv- and Ma-Controls30
List of Displayed Messages31
List of Messages in the Error Memory32
Entering Service Mode37
Selecting Test Programs with the Kv+/- Buttons37
Error Messages in Service Mode37
List of Test Programs Available in Service Mode38
- P01 - Filament Test38
- P02 - Rotation Test, if the FW Version Is Higher than 1.4 or 1.4E38
- P02 - Rotation Test, if the FW Version Is Lower than 1.5 or 1.5E39
- P03 - Capacitor Bank and Charging Test40
- P04 - Display, Led and Buzzer Test40
- P05 - "Automatic" Maintenance Test41
- P06 - Capacitor Formation41
- P07 - Query Filament Values from the Battery-Backed RAM42
- P08 - Display the Message History42
- P09 - Clear the Message History43
- P10 - Fast Adaptation43
- P11 - Backup Battery Test44
- P12 - Inverter and Single Tank Test44
- P13 - Inverter Test45
- P14 - Number of Kv Steps and Upper Kv Limit45
- P15 - Upper Mas Limit46
- P16 - Show the Exposure Counter46
Tests and Measurements in the High Voltage Circuit47
Malfunction in the Inverter or Single Tank48
Replacing the Backup Battery65
Replacement of Mains Cable/Cable Winder67
Replacing the Collimator Lamp71
- Checking the Light Intensity72
- Light Field Relative to the X-Ray Field72
Replacing the Collimator74
- Checking the Light Intensity77
- Light Field Relative to the X-Ray Field77
Adjusting the Arm System79
- Parallelism79
- Counterbalance81
- Adjusting the Friction Linings82
Replacing the Spring Pack85
Adjustment and Replacement of the Turn Plate89
Replacement of the Single Tank92
Replacement of the Support Arm Cable Harness96
Adjustment of the Hand/ Parking Brake100
Replacing the Supporting Wheels101
Replacing the Friction Linings102
- Replacing the Horizontal Friction Lining102
- Replacing the Vertical Friction Linings103
Adjustment of the Speed107
Replacement of the Transmission Belt and Belt Tension Adjustment108
- Belt Replacement108
- Tension Adjustment109
Replacing the Motor Unit111
Repairs to the Motor Power Unit112
Replacement of Batteries112

Siemens MOBILETT Plus - Page 114

Table of Contents

Other manuals for Siemens MOBILETT Plus

Related product manuals