26 Kienzle MTCO 1324
Operating controls (Page 2, figure I)
a) "Blocked drawer"
b) "Hinged drawer"
Note
The operation of both device designs is, in
principle, identical. Operating steps which de-
viate from the normal procedure are listed
separately.
1) Left-hand keypad
2) Right-hand keypad
3) Display
• The basic display is shown permanently.
• Messages / notes are displayed
automatically, ➥ see page 32.
4) Separating plate
between driver 1 and driver 2 chart.
5) Checkpoint marking
for checking the temporally correct posi-
tion of the chart carrier.
6) "Pear-shaped" chart carrier
7) Nameplate
The manufacturer, device type, inspection
mark and serial number are indicated
here.
Key for unlocking the drawer.
Key for adjusting the time group for
driver 1.
Key for adjusting the time group for
driver 2.
Key for selecting the following func-
tions:
• "Time Adjustment",
➥ see page 31.
• Display "Error Memory",
➥ see page 32.
Keys for adjusting the time and for
displaying the current error mes-
sages.
Date + time
Chart + time group
symbol, driver 2
Error symbol
Total kilometre reading
Chart + time group
symbol, driver 1
To Next Page
Loading...
