36 Kienzle MTCO 1324
Description of the chart
The appropriate chart for the device
(Page 150, figure IV)
Outside the EU, the respective national ap-
proval marks and provisions are valid.
Depending on the full-scale value and the de-
vice design, you may use the following charts
within the MTCO 1324:
When using (ordering) charts, always
ensure that the full-scale value (1)
and the approval mark (2) of the
MTCO 1324 correspond to the details
(3) or (4) on the chart respectively.
Standard chart Chart for electronical evaluation Approval mark
100-24 EC 4K 100-24/2 EC 4B e1-83
100-3300-24 EC 4K 100-3300-24/2 EC 4B e1-85
125-24 EC 4K 125-24/2 EC 4B e1-83
125-3300-24 EC 4K 125-3300-24/2 EC 4B e1-85
140-24 EC 4K 140-24/2 EC 4B e1-83
180-24 EC 4B e1-83
EC =
=
Chart for the EEC tachograph
Chart for the device design with rpm recording (option),
e.g. Type: 1324.50111...
To Next Page
Loading...
