Siemens optiPoint 500 entry - Accessing Functions; With Codes; With Function Keys

Step by Step
Basic operating instructions
10
Accessing Functions
... With Codes
You can activate the functions of your system by enter-
ing codes such as:
qmk DND (do not disturb) on.
rmk DND (do not disturb) off.
All codes to activate or enable functions are always in-
troduced by pressing the star key, and all codes to de-
activate, disable or delete functions are always entered
starting with the pound key.
An alphabetically ordered overview of all functions and
their corresponding codes can be found in the
Appendix (Quick-Reference Operating Instructions).
... With Function Keys
Functions for which a key has been set up can be ac-
cessed directly as follows.
Press the "consultation hold" key. The function is exe-
cuted, provided this is possible in the current situation.
If your service personnel has changed the default
assignments and saved functions on keys in ac-
cordance with your requests or requirements,
you can execute these functions by pressing the
appropriate keys.
Consultation