Siemens optiPoint 500 entry - Using System Functions from the Outside (DISA: Direct Inward System Access)

Step by Step
Using Other Functions/Services
42
Activating Functions for Another
Telephone
If this function has been configured (contact the service
personnel), you can turn the following functions on and
off for other telephones. This feature is also known as
associated service.
• Do not disturb, code:
*
97/#97 Æ Page 34
• Call forwarding, code
*
11,
*
12,
*
13/#1 Æ Page 14
• Lock and unlock all phones,
code:
*
66/#66 Æ Page 36
•Group ringing, code:
*
81/#81 Æ Page 48
•Group call,
code:
*
85/#85 Æ Page 47
• Reset services and functions,
code #0 Æ Page 41
• Control relay,
code:
*
90/#90 Æ Page 45
• Night service, code
*
44/#44 Æ Page 31
• Timed reminders,
code
*
65 Æ Page 32
n Lift the handset.
qlg Enter the code.
o Enter the internal number of the telephone for which
you want to activate the function.
o w Enter the code – e.g.
*
97 for DND on – and procedure
(if relevant).
Using System Functions from the
Outside
(DISA: Direct Inward System Access)
If this function has been configured (contact the service
personnel), you can set up external outgoing calls from
outside the system, just like an internal user. You can
also activate and deactivate the following functions in
your system:
• Reset services and functions,
code: #0 Æ Page 41
• Call forwarding, code:
*
1/#1 Æ Page 14