EasyManua.ls Logo

Siemens optiPoint 500 entry - Fixing Problems; Troubleshooting

Siemens optiPoint 500 entry
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fixing Problems
59
Fixing Problems
Telephone Maintenance
Always use a damp or antistatic cloth to clean the telephone. Never
use a dry cloth.
If the telephone is very dirty, clean it with a diluted neutral cleaner con-
taining surfactants, such as a dish detergent. Afterwards remove all
traces of the cleaner with a damp cloth (using water only).
Never use cleaners containing alcohol, cleaners that corrode plastic, or
abrasive powders.
Troubleshooting
Pressed key does not respond:
Check whether the key is stuck.
Telephone does not ring:
Check whether the "do not disturb" function was activated on your tele-
phone. On lifting the handset, you will hear a special dial tone. If so, deac-
tivate it Æ Page 34.
You cannot dial an external number:
Check whether you telephone is locked. On lifting the handset, you will
hear a special dial tone. If so, unlock the telephone Æ Page 36.
To correct any other problem:
First contact the service personnel. If the service personnel is unable to
correct the problem, contact Customer Service.

Table of Contents

Other manuals for Siemens optiPoint 500 entry

Related product manuals