Siemens optiPoint 500 entry - Using Night Answer

Step by Step
Special Functions in the LAN (Not for HiPath 500)
54
Using Night Answer
If authorized (contact the service personnel), you can
define telephones in other HiPath 3000 communica-
tions platforms as the night answer Æ Page 31.
n Lift the handset.
qhk Enter the code.
o Enter the (DISA) call number of the HiPath 3000 to
which the night answer telephone is connected.
r Enter.
o Enter the (DISA) call number of the telephone from
which you wish to activate/deactivate the night answer
service.
r Enter.
Activating this function:
qhh Enter the code.
o w Enter the destination number (= temporary night an-
swer service) within 5 seconds.
Deactivating this function:
rhh w Enter the code.