Step by Step
Making Calls – Convenience Functions
30
If You Cannot Reach a Destination
Call Waiting (Camp-On)
It is important that you reach the called party, but the
number is busy.
n Lift the handset.
o Enter the internal station number.
Wait (approx. 5 seconds) until the busy tone is followed
by the ring tone.
The called party can then respond Æ Page 25.
Busy Override - Joining a Call in Progress
This function is only available if it has been configured
by the service technician (contact the service person-
nel).
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
qjf w
Press the key. LED flashes. Enter the code.
The called party and person to whom this party is talk-
ing hear an alerting tone every two seconds.
If the called party has a system telephone with display,
the following appears on the screen: "Override: (station
no. or name)".
You can now start talking.
The called party can prevent automatic call wait-
ing Æ Page 26.
If this feature is configured (contact the service
personnel), you will hear the ring tone immedi-
ately.
Consultation
To Next Page
Loading...
