Siemens optiPoint 500 entry - Opening the Door

Special Functions in the LAN (Not for HiPath 500)
57
Step by Step
Opening the Door
If this feature is configured (contact the service person-
nel), you can also activate the door opener Æ Page 19
in other HiPath 3000 communications platforms.
n Lift the handset.
qhk Enter the code.
o Enter the (DISA) call number of the HiPath 3000 in
which the door is to be opened.
r Enter.
o Enter the (DISA) call number of the telephone from
which you wish to activate the door opener.
r Enter.
qje Enter the code.
o w Enter the call number of the entrance telephone.