Siemens S7-200 - Page 10

Configuration
Micro Automation Set 14 Entry ID 21062588
V2.0 05/18/05 10/35
Copyright © Siemens AG 2005 All rights reserved
Set14_DocTech_V2.0_en.doc
Layout diagram of Micro Automation Set 14 – WinAC “Backup”
WinAC “Backup” consists of a SIMATIC MicroBox PC 420 (2). The
integrated Ethernet interface is connected to SCALANCE X108 (3) of
S7-200 “Basis” via an Industrial Ethernet FC standard cable with RJ45
plugs.
LOGO!Power 4A (1) provides the 24V power supply.
Layout diagram of Micro Automation Set 14 – WinCC flexible “HMI”
A standard PC with Ethernet interface and installed operating system MS
Windows 2000 or MS Windows XP Professional is required for the WinCC
flexible “HMI” station. WinCC flexible 2005 Advanced is used as
visualization software.
S7-WinAC “Backup”
S7-200 “Basis”
230V~
21
3
24V
+ -