Siemens S7-200 - Page 9

Configuration
Micro Automation Set 14 Entry ID 21062588
V2.0 05/18/05 9/35
Copyright © Siemens AG 2005 All rights reserved
Set14_DocTech_V2.0_en.doc
Layout diagram of Micro Automation Set 14 – S7-300 “Backup”
S7-300 “Backup” consists of an S7-300 CPU 315-2 PN/DP (1) with 64 KB
micro memory card. The integrated Ethernet interface is connected to
SCALANCE X108 (3) of S7-200 “Basis” via an Industrial Ethernet FC
standard cable with RJ45 plugs.
A PS 307 2A (1) provides the 24V power supply.
Layout diagram of Micro Automation Set 14 – S7-400 “Backup”
S7-400 “Backup” consists of an S7-400 CPU 412-1 (2) and an Ethernet CP
443-1 (3) communications module. The Ethernet CP 443-1 is connected to
SCALANCE X108 (4) of S7-200 “Basis” via an Industrial Ethernet FC
standard cable with RJ45 plugs.
A PS 407 4A (1) provides the 24V power supply.
S7-300 “Backup” S7-200 “Basis”
230V~
24V
+ -
2
1
3
S7-400 “Backup” S7-200 “Basis”
230V~
Rack
2 1 3
4