Assembling
4.2 Unpacking
PAC RS485
20 Manual, 02/2008, A5E02091800B-01
See also
Safety notes (Page 11)
Changing the address (Page 57)
Examples of MODBUS communication (Page 75)
Configuration of the PAC RS485 expansion module on the SENTRON PAC3200
Power Monitoring Device (Page 58)
4.2 Unpacking
Observe the ESD Guidelines. Open the packaging with care. Do not use excessive force.
Checks
After receiving the module, and before installing it, you should make the following checks:
● Check the packaging for damage.
● Make sure that the package contents are complete.
● Check the module for external damage.
Please contact your Siemens sales partner in the following cases:
● The packaging is damaged
● The contents of the package are not complete
● The module is damaged
Storage
Store the PAC RS485 expansion module in a dry place.
See also
Electrostatic sensitive devices (ESD) (Page 81)
To Next Page
Loading...
