Siemens SENTRON PAC RS485 User Manual

Introduction
1.5 Technical support
PAC RS485
Manual, 02/2008, A5E02091800B-01
9
1.5 Technical support
Contact for technical problems and other questions
Help is available from:
● Service and support contacts in your region - worldwide
● Online service and support
● Technical support
Contacts in the region
Contacts in your region can provide support worldwide.
Table 1-1 Contacts in your region - worldwide
Utility Address, number
Internet: Service and support (http://www.siemens.com/automation/service&support) under
"Contact > Contacts worldwide"
Support address:
SIEMENS AG
A&D CD MM1
Gleiwitzerstr. 555
D-90475 Nuremberg
Online support
This comprehensive information system is available day and night via the Internet. Online
service and support offers product support, services and support, and support tools from the
shop.
Table 1-2 Online service and support
Utility Address, number
Internet: Online service and support (http://www.siemens.com/automation/service&support)
Technical Support
Technical support offers:
● Expert advice on technical queries over a broad subject area
● Tailored services relating to our products and systems
If you require technical support or you have questions about the product, contact Technical
Support.

Siemens SENTRON PAC RS485 Specifications

General

Communication Interface	RS485
Protocol	Modbus RTU
Display	LCD
Mounting	DIN Rail
Device Type	Power Monitoring Device
Series	SENTRON PAC
Operating Temperature	-10 °C to +55 °C
Storage Temperature	-25 °C to +70 °C
Relative Humidity	5 % to 95 % (non-condensing)
Weight	Approx. 0.3 kg
Frequency Measurement Range	45 Hz to 65 Hz
Protection Class	IP20