Service and maintenance
7.2 Repair
PAC RS485
62 Manual, 02/2008, A5E02091800B-01
7.2 Repair
Procedure
NOTICE
Loss of certification and warranty
If you open the module, the module certification will be lost and the Siemens warranty will
be invalidated. Only the manufacturer is permitted to carry out repairs on the module.
Return faulty or damaged modules to Siemens for repair or replacement.
If the module is faulty or damaged, proceed as follows:
1. Discharge yourself.
2. Remove the module.
3. Pack the module in a suitable manner to prevent it from being damaged during transport.
4. Return the module to Siemens. You can obtain the address from:
– Your Siemens sales partner
– Technical support
See also
Electrostatic sensitive devices (ESD) (Page 81)
Disassembly (Page 27)
Technical support (Page 9)
7.3 Disposal
Disposal and recycling
Dispose of or recycle the module in accordance with the applicable laws and regulations in
your country.
To Next Page
Loading...
